Fargo HDP5000

Colors: Up to 16.7 million / 256 shades per pixel

Print Ribbon Options:

• Full-color, YMC*, 750 prints
• Full-color with resin black, YMCK*, 500 prints
• Full-color with two resin black panels, YMCKK*, 500 prints,
• Full-color with resin black and heat seal panel for difficult-to-print surfaces, YMCKH*, 500 prints
• Full-color with resin black and inhibit panel for signature or other non-printing areas, YMCKI*, 500 prints
• Full-color with fluorescing and resin black, YMCFK*, 500 prints
• Resin black, K, 3000 prints

HDP Film Options:

• Clear (1,500 prints)
• Standard Holographic (500 prints)
• Custom Holographic, special order (500 prints)

Overlaminate Options:

• Thermal Transfer Overlaminate, .25 mil thick, 500 prints
• PolyGuard® Overlaminate, 1.0 mil and .6 mil thick, 250 prints (PolyGuard available in a CR-80 patch size)
  All overlaminates available in clear, standard holographic design or custom holographic design

Print Speed**:
Batch Mode:

• Up to 24 seconds per card / 150 cards per hour (YMC with transfer)*
• Up to 29 seconds per card / 124 cards per hour (YMCK with transfer)*
• Up to 40 seconds per card / 90 cards per hour (YMCKK with transfer)*
• Up to 35 seconds per card / 102 cards per hour (YMCK with transfer and dual-sided, simultaneous lamination)*
• Up to 48 seconds per card / 75 cards per hour (YMCKK with transfer and dual-sided, simultaneous lamination)*

Accepted Standard Card Sizes: CR-80

Accepted Card Thickness:

• Print only: .030” (30 mil) to .050” (50 mil) / .762mm to 1.27mm
• Print/Lamination: .030” (30 mil) to .050” (50 mil) / .762mm to 1.27mm

Accepted Card Types: ABS, Laminated PVC, PET, PETG, proximity, smart and mag stripe cards, optical memory cards Note: ABS and PVC cards are not recommended for use in the HDP5000 Lamination Module.***

Input Card Cartridge Capacity: 100 cards (.030” / .762mm)

Output Hopper Card Capacity: 200 cards (.030” / .762mm)

Card Cleaning: Replaceable cleaning roller (included with each print ribbon)

Software Drivers: Windows® 10 / 8.1 / 8 / 7 / Vista® / XP / Server 2012 / Server 2012 R2 / Server 2008 / Server 2008 R2 / Server 2003

Single Wire USB 2.0 Encoding Options:

• ISO Magnetic Stripe Encoding, dual high- and low-coercivity, Tracks 1, 2 and 3
• Contactless Smart Card Encoder (HID iCLASS® and MIFARE)
• ISO 7816 Contact Smart Card Encoder
• Prox Card Reader (HID read-only)

Operating Temperature: 65° to 90° F / 18° to 32° C

Humidity: 20 – 80% non-condensing

Printer Dimensions:

• HDP5000: 11.50”H x 12.25”W x 9.25”D / 292mmH x 313mmW x 235mmD
• HDP5000 + Dual-Sided Module: 11.50”H x 17.50”W x 9.25”D / 292mmH x 445mmW x 235mmD
• HDP5000 + Single-Sided Lam Module: 12.75”H x 25”W x 9.25”D / 324mmH x 635mmW x 235mmD
• HDP5000 + Dual-Sided Module + Dual-Sided Lam Module: 12.75”H x 30”W x 9.25”D / 324mmH x 762mmW x 235mmD

Fargo HDP5000 Printer Weight:

• HDP5000: 16 lbs. / 7.3 kg, HDP5000 + Dual-Sided Module: 22 lbs. / 10 kg,
• HDP5000 + Single-Sided Lam Module: 28 lbs. / 12.7 kg
• HDP5000 + Dual-Sided Module + Dual-Sided Lam Module: 36 lbs. / 16.4 kg

Supply Voltage: 100-240 VAC, 3.3A

Supply Frequency: 50 Hz / 60 Hz

FARGO Secure Materials: FARGO Card Printer/Encoders require highly specialized media to function properly. To maximize printed card quality and durability, printhead life and printer/encoder reliability, use only HID Secure Materials.
HID warranties are void, where not prohibited by law, when non-HID Secure Materials are used.

* Indicates the ribbon type and the number of ribbon panels printed where Y=Yellow, M=Magenta, C=Cyan, K=Resin Black, I=Inhibit, F=Fluorescing, H=Heat Seal
** Print speed indicates an approximate print speed and is measured from the time a card drops into the output hopper to the time the next card drops into the output hopper. Print speeds do not include encoding time or the time needed for the PC to process the image. Process time is dependent on the size of the file, the CPU, amount of RAM and the amount of available resources at the time of the print.
*** ABS and PVC cards are not recommended for use in the HDP5000 Lamination Module. (Free card proofing available. Please contact your local integrator for more information.)